Contact Seller
Prior And Willis Antiques
Tel01945 429667Please quote Antiques Atlas.
Large Copper 1900s Lantern, Street Light
French Gilded Bronze Convex Hall Lantern
French Bronze Triple Light Hall Antique Lantern
Large pair of Windsor style copper street lanterns
French Gilded Convex Hall Antique Lantern
Moroccan Style Iron Candle Lantern
Wrought Iron French Arts and Crafts Hall Lantern
Classical Iron Hanging Lantern
French Gilded Bronze Antique Hall Lantern
Large Copper Lantern, Street Light
Large 1930's Brass & Glass Hall Lantern
Victorian Brass and Coloured Glass Lantern
Non UK callers :
+44 1945 429667
Victorian Stained Leaded Glass Brass Lantern Hall
Antique Victorian stained leaded glass brass hanging lantern hall chandelier.
The lantern probably dates from Victorian times and was designed originally to be used with an oil lamp. It has later been wired for electricity, works and has modern wiring (including an earth to both lampholder and lantern). The lantern takes the large bayonet bulb fitting (B22).
Fantastically old looking, with lovely patinated brass.
There is a door in one side which would originally have been used to service / light an oil lamp.
Very ornate and would look great in the right location.
Max. Overall dimensions 300mmW x 300mmD x 1500mmH (inc. chain, which could be shortened).
The fitting is 760mm high.
Historic knocks, marks, historic distortion, repairs and alterations. The stained glass panels are very old and quite fragile. Some of the glass pieces have been replaced (not necessarily with the correct colour or pattern). The chains are later replacements. We are supplying the lantern with a large 4" hook to hang the chain from the ceiling with. Note that the lantern does not have a ceiling rose, but can be connected to a standard modern fitting installed adjacent or near to the hook.
Please note the following important precautions when dealing with chandeliers
Because of the size and weight it will be necessary for at least two people to fix it to the ceiling.
Make sure that the ceiling and fixing are adequate to support the weight of the chandelier.
Check that no parts of the chandelier have worked loose in transit. If necessary tighten, but take care not to over tighten.
This chandelier must be installed by a competent Person (Building Regulations part P approved) and the lighting circuit is to be tested before and after installation.
Re-test the chandelier before connection to a mains supply (in case any wires have been disturbed or chaffed in transit).
Stock No. 3033.
FREE UK DELIVERY
SellerPrior And Willis Antiques
View all stock from
Prior And Willis Antiques
The Lewes, 47 Salts Road
West Walton
Wisbech
Cambridgeshire
PE14 7EJ
Tel : 01945 429667
Non UK callers : +44 1945 429667
Get directions to Prior And Willis Antiques
The lantern probably dates from Victorian times and was designed originally to be used with an oil lamp. It has later been wired for electricity, works and has modern wiring (including an earth to both lampholder and lantern). The lantern takes the large bayonet bulb fitting (B22).
Fantastically old looking, with lovely patinated brass.
There is a door in one side which would originally have been used to service / light an oil lamp.
Very ornate and would look great in the right location.
Max. Overall dimensions 300mmW x 300mmD x 1500mmH (inc. chain, which could be shortened).
The fitting is 760mm high.
Historic knocks, marks, historic distortion, repairs and alterations. The stained glass panels are very old and quite fragile. Some of the glass pieces have been replaced (not necessarily with the correct colour or pattern). The chains are later replacements. We are supplying the lantern with a large 4" hook to hang the chain from the ceiling with. Note that the lantern does not have a ceiling rose, but can be connected to a standard modern fitting installed adjacent or near to the hook.
Please note the following important precautions when dealing with chandeliers
Because of the size and weight it will be necessary for at least two people to fix it to the ceiling.
Make sure that the ceiling and fixing are adequate to support the weight of the chandelier.
Check that no parts of the chandelier have worked loose in transit. If necessary tighten, but take care not to over tighten.
This chandelier must be installed by a competent Person (Building Regulations part P approved) and the lighting circuit is to be tested before and after installation.
Re-test the chandelier before connection to a mains supply (in case any wires have been disturbed or chaffed in transit).
Stock No. 3033.
FREE UK DELIVERY
Price The price has been listed in British Pounds.
Conversion rates as of 27/MAY/2026. Euro & Dollar prices will vary and should only be used as a guide.
Always confirm final price with dealer.
DimensionsMax. Overall dimensions 300mmW x 300mmD x 1500mmH (inc. chain, which could be shortened).
The fitting is 760mm high.
Category Antique Lighting
Period Victorian Antiques
Material Brass
Origin English
Item code as462a122 / 3033
Status Sold
£445.00 
$597.15 
€513.62 
$
€
Conversion rates as of 27/MAY/2026. Euro & Dollar prices will vary and should only be used as a guide.
Always confirm final price with dealer.
View all stock from
Prior And Willis Antiques
The Lewes, 47 Salts RoadWest Walton
Wisbech
Cambridgeshire
PE14 7EJ
Tel : 01945 429667
Non UK callers : +44 1945 429667
Get directions to Prior And Willis Antiques
You may also be interested in
Large Copper 1900s Lantern, Street Light
French Gilded Bronze Convex Hall Lantern
French Bronze Triple Light Hall Antique Lantern
Large pair of Windsor style copper street lanterns
French Gilded Convex Hall Antique Lantern
Moroccan Style Iron Candle Lantern
Wrought Iron French Arts and Crafts Hall Lantern
Classical Iron Hanging Lantern
French Gilded Bronze Antique Hall Lantern
Large Copper Lantern, Street Light
Large 1930's Brass & Glass Hall Lantern
Victorian Brass and Coloured Glass Lantern